Exclusive client gift
Welcome! An Extra Gift For You.
You’re in the right place for your setup videos. As a new DAYCrafter client, we also want to give you our exclusive EBook Training Guide. Subscribe to our client newsletter to get your free guide now, plus early access to new products and exclusive offers.
Tweaks
DAY-X
V-Tension Cam Bridge™ · Forge-Lock Core Clips™ 8mm
No hook-and-loop straps. No plastic buckles. No compromise.
The DAY-X locks your weights at your hips so you can focus on the only thing that matters — your reps.
0.
Plastic · Zero Compromises
3
Modes · 7+ Exercises
8mm
Solid Steel Clips
Forge
Lock 8mm
Launch Price
$32.39
$59.99
Your Weights. Locked At Your Hips.
Most hip thrust belts let the weight shift, wobble, and pull you out of position mid-set. The DAY-X V-Tension Cam Bridge™ uses infinite micro-adjustment to firmly cradle your dumbbells, kettlebells or plates against your hips — locked in, every rep.
V-Tension Cam Bridge™
Infinite micro-adjustment cinches your load firmly against your body. No shifting. No re-adjusting between sets. Just pure, locked-in stability.
Forge-Lock Core Clips™
Not generic carabiners. Forge-Lock 8mm solid steel core clips — built for repeated loaded hip thrusts. You’ll feel the difference the moment you pick them up.
No Hook-and-Loop.
Hook-and-loop straps wear out. Plastic buckles crack. The DAY-X uses only metal hardware — because your gear shouldn’t fail before you do.
10cm Wide Load Strap
The 10cm-wide distal arms cradle the full handle of your dumbbell — not the narrow strip most belts give you. More contact, less rotation, no lateral swing.
For Women & Men
Home gym. Commercial gym. Travel. The DAY-X was built for any athlete who refuses to let their equipment hold them back.
Crafter-Grade Build
The V-Tension Cam Bridge™ architecture is exclusive to DAYCrafterGear. Patent Pending. Engineered and tested by athletes who refused to compromise.
3 Modes. 7+ Exercises.
One belt. Full training system. Each mode is a configuration that unlocks multiple exercises — not a single use case.
Tethered Setup
Maximum stability for heavy hip thrusts. The Crafter-Lock Waistband™ anchors the belt to your hips, the V-Tension Cam Bridge™ cinches the load firmly in place.
- Hip thrust & glute bridge with anchored load
- Works with dumbbells, kettlebells & plates
- Dumbbells cradled horizontal — no swing, no drift
Free Use Configuration
Untethered training. Remove the Crafter-Lock Waistband™ and the DAY-X becomes a free harness — across the shoulders for squat yoke, around the body for loaded lunges and planks.
- Squat yoke, lunges & loaded planks
- Free hip thrust without anchor
- Belt becomes a versatile load harness
Suspended Load
Loads hang from your body. The Iso-Drop Suspension Gear™ transfers weight vertically through the chassis — for belt squats, weighted dips, and weighted pull-ups.
- Belt squat, weighted dips & pull-ups
- Plate, dumbbell or kettlebell compatible
- Load hangs at center of gravity
See the Difference
Tap or swipe to explore.
Everything Included.
Seven engineered components. One complete training system.
-
×1
Core Chassis™
Padded chassis with 10cm-wide load straps, neoprene side, anti-slip backing
-
×1
Crafter-Lock Waistband™
Quick-release waist anchor for Mode 1 stability
-
×2
Forge-Lock Core Clips™
8mm solid steel, smooth-edge carabiners
-
×1
V-Tension Cam Bridge™
Cam buckle tension strap, locks under load
-
×1
Iso-Drop Suspension Gear™
Auxiliary strap for Mode 3 Suspended
-
×1
Crafter Glute Band™
Fabric resistance band, light tension
-
×1
Tactical Vault™
Carry bag, home gym & travel ready
-
+
Setup Guide
Printed manual + QR to video tutorials
Plus a free 3-Phase Training Guide (digital PDF bonus for DAY-X owners) — see details below.
Seven components for
$32.39
$59.99
LAUNCH COUPONStandard hip thrust belts charge similar prices for the belt alone — no Core Clips, no Glute Band, no Setup Guide included.
How the System Works.
Four engineered components working together. Each mode rearranges them differently — the system stays the same.
The Core Chassis™ Anchors to Your Body
A padded chassis sits across your pelvis — neoprene against the body, anti-slip backing, contoured to spread pressure evenly. Extending from each side are 10cm-wide load straps engineered to cradle the handles of your weights without rotation.
Forge-Lock Core Clips™ Anchor the Tension Loop
Two 8mm solid steel clips sit at the end of the distal arms. They act as fixed friction pulleys — the V-Tension Cam Bridge™ routes through both clips to form a closed-loop tension system around your load. In Mode 3, they connect to the Iso-Drop Suspension Gear™ for vertical load suspension.
V-Tension Cam Bridge™ Locks Under Load
The cam buckle creates a closed-loop tension system between the two Core Clips. Pull the strap to tighten — infinite micro-adjustment until the load is firmly cradled. Locks tighter under heavier weight.
3 Modes Unlock 7+ Exercises
The Crafter-Lock Waistband™ and Iso-Drop Suspension Gear™ rearrange the system into Mode 1 Tethered, Mode 2 Free Use, or Mode 3 Suspended. The printed Setup Guide in your kit has a QR code to free video tutorials for each mode.
Need step-by-step setup for each mode?
Watch Setup VideosStandard vs. DAY-X Belt
See the difference between a standard hip thrust belt and the DAY-X.
| Feature | Standard Belt | DAY-X ✦ |
|---|---|---|
| Closure System | Hook-and-loop straps that loosen |
Cam Buckle that locks under load
Stays secure through every rep.
|
| Hardware | Plastic buckles or basic clips |
Forge-Lock 8mm solid steel
Stronger, safer, built to last.
|
| Weight Stability | Weights swing or shift mid-rep |
V-Tension Cam Bridge™ cinches the load against the body
No swing. More control. Better results.
|
| Modes of Use | 1 mode (hip thrust only) |
3 modes · 7+ exercises
Train more. Get more.
|
| Adjustment | Fixed settings (limited range) |
Continuous infinite micro-adjustment
Dial in your perfect fit.
|
| ★ Waist Anchoring | Most belts: not included |
Crafter-Lock Waistband™ INCLUDED
Locks the belt in place. Zero ride-up.
|
| What’s Included | Belt only or belt + strap |
Full kit + printed Setup Guide
Plus free digital Training Guide.
|
Standard
Hook-and-loop straps that loosen
DAY-X ✦
Cam Buckle that locks under load
Stays secure through every rep.
Standard
Plastic buckles or basic clips
DAY-X ✦
Forge-Lock 8mm solid steel
Stronger, safer, built to last.
Standard
Weights swing or shift mid-rep
DAY-X ✦
V-Tension Cam Bridge™ cinches the load against the body
No swing. More control. Better results.
Standard
1 mode (hip thrust only)
DAY-X ✦
3 modes · 7+ exercises
Train more. Get more.
Standard
Fixed settings (limited range)
DAY-X ✦
Continuous infinite micro-adjustment
Dial in your perfect fit.
Standard
Most belts: not included
DAY-X ✦
Crafter-Lock Waistband™ INCLUDED
Locks the belt in place. Zero ride-up.
Standard
Belt only or belt + strap
DAY-X ✦
Full kit + printed Setup Guide
Plus free digital Training Guide.
Weight Type Compatibility
Which weights work in which modes — before you commit, check what fits your training.
One thing to note: Mode 1 and Mode 2 cradle the handle of your weight, so plates without grips work in Mode 3 only — where the load hangs below your body for belt squats, dips, and weighted pull-ups.
3-Phase Training Guide.
A complete digital training plan for the DAY-X — strength & hypertrophy programs from beginner to advanced, all 3 modes covered. Includes RIR protocols, deload week guide, and structured 3-phase progression.
- Dual-goal system: Strength & Hypertrophy programs
- Fits your life: 3, 4 or 5 days per week
- Never get stuck: 3-Phase progression — Foundation → Acceleration → Peak
- For all levels: Beginner regressions to advanced lifts
Before You Train.
Everything you need to know before training with the DAY-X.
The weight feels uncomfortable on my hips during hip thrust — what now?
Your Cam Bridge is dialed in too tight. The DAY-X is designed for the load to hang slightly below your hip line, not rest on your bones — and that sweet spot is different for every body and every weight.
The safe way to adjust:
- Come down to the seated start position first — never adjust mid-set.
- Loosen the Cam Buckle a small amount.
- Test with one rep. Re-adjust if needed.
- When the weight stops pressing into your hips and feels suspended just below them, you found it.
This applies to Mode 1 Tethered and Mode 2 Free Use hip thrust. Mode 3 Suspended loads below the body, so this isn’t a concern there.
Will this Hip Thrust Belt fit me?
What weights can I use with it?
Dumbbells, kettlebells and plates — compatibility depends on the mode you’re training in.
Olympic plates with handle (2″) work in all 3 modes. Olympic plates without handle and standard 1″ plates work in Mode 3 Suspended only.
See Full Compatibility ChartIs the setup hard to learn?
Can I really train hip thrust, dips, AND squats with one belt?
What’s the difference between the V1 Classic and the DAY-X?
No Excuses. No Weak Gear.
Stop Fighting
Your Gear.
The DAY-X is available now on Amazon. Launch coupon won’t last.
GET DAY-X — $32.39DAYCrafterGear · Craft Your Greatness